E-mail:solidpipeline@aliyun.com info@cnsolid.com

Shanxi Solid Industrial Co.,Ltd.
Pipe Fitting
Pipe Fitting
Pipe Fitting
Home > News

Maintenance of The Valve

Jun 24, 2017

For the installation of the valve, we must carefully check the sign of the valve, installation path, to eliminate defects caused by the transport process, and eliminate the valves of the dirt. The installation can be connected directly by the valve device in piping. Under normal circumstances, can be installed anywhere in the pipeline.

Ball valve, globe valve, gate valve used only for the fully open or fully closed, thread on the valve and valve seal down inside, hand wheel rotation to tighten the top position, you can prevent media leaks from the filler. 

For the storage of the valve, should be regularly checked, the exposed surfaces shall be clean and remove dirt, neatly stored in the room ventilated, dry place, 

For the use of the valve, we should keep the valves clean, drive screw must be lubricated regularly, once found fault, should immediately stop using, identify the cause to clear the fault.

Globe Valve

Previous: How to Protect The Ductile Iron Pipe?

Next: Installation Method of Flange Flexible Interface

Copyrights © Shanxi Solid Industrial Co., Ltd. All Rights Reserved